Recalls are issued for a make, model and model year. Whether the repair has already been done on one specific car is known only to its manufacturer and dealers. Check your vehicle's official status at nhtsa.gov/recalls or with a dealer.
Fuel system, gasoline: storage, evaporative emissions
Ford Motor Company (Ford) is recalling certain 2012-2018 Focus vehicles previously repaired incorrectly under recall number 18V735. The Canister Purge Valve (CPV) may malfunction, causing the engine to stall unexpectedly while driving.
Risk and remedy
Risk: An engine that stalls while driving increases the risk of a crash.
Remedy: Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed July 29, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S40. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Power train: manual transmission
Ford Motor Company (Ford) is recalling certain 2015-2018 Focus and 2013-2016 Fusion vehicles previously repaired incorrectly under recall numbers 18V169 and 18V845. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
Risk and remedy
Risk: A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy: Dealers will update the software, free of charge. Additionally, dealers will inspect Focus vehicles and replace the clutch assembly as necessary, free of charge. Owner notification letters were October 16, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S43. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Equipment: electrical, engine block heater
Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Risk and remedy
Risk: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed March 6, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S01. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026.
Equipment: electrical, engine block heater
Ford Motor Company (Ford) is recalling certain 2016-2018 Focus, 2019 Explorer, and 2024 Explorer vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Risk and remedy
Risk: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded blanking plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed February 13, 2026. Additional letters will be sent once the final remedy is available, anticipated in December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026. This recall expands previous recall number 25V685.
Engine and engine cooling: engine, oil/lubrication
Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus and 2018-2022 Ford EcoSport vehicles. The oil pump drive belt or drive belt tensioner may fail, resulting in a loss of engine oil pressure.
Risk and remedy
Risk: A loss of oil pressure can result in an engine stall and a loss of power braking assist, increasing the risk of a crash.
Remedy: Dealers will replace the oil pump tensioner assembly and oil pump drive belt, free of charge. If engine failure occurs due to a damaged oil pump belt and/or oil pump belt tensioner, Ford has authorized dealers to replace the engine assembly as an interim repair before the availability of remedy parts for the final repair. This repair will be free of charge (parts and labor). Owner notification letters were mailed August 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S64.
Power train: manual transmission
Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus vehicles equipped with a 1.0L Fox GTDI engine and a 6-speed manual transmission. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
Risk and remedy
Risk: A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy: Ford will notify owners, and dealers will update vehicles with software that detects and prevents prolonged clutch slip, and will replace the clutch, as necessary, free of charge. The recall began January 17, 2019. Owners may contact Ford at 1-866-436-7332. Ford's number for this recall is 18S07. Note: This recall is an expansion of Recall 18V-169.
Fuel system, gasoline: storage, evaporative emissions
Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.
Risk and remedy
Risk: The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began August 19, 2019. Owners may contact Ford Customer service at 1-866-436-7332. Ford's number for this recall is 18S32. Note: Until the vehicle is serviced for this concern, owners are advised to keep the fuel tank at least halfway full.
Power train: manual transmission
Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Fusion vehicles equipped with a 1.6L GTDI engine and 6-speed manual transmission and 2015-2016 Ford Focus vehicles equipped with a 1.0L GTDI engine and 6-speed manual transmission. Also included are four 2017 Ford Focus vehicles that had clutch replacements with potentially affected parts. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
Risk and remedy
Risk: A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy: Ford will notify owners, and dealers will update the Focus vehicles with software that detects and prevents prolonged clutch slip, and will replace the clutch, as necessary, free of charge. Owners of Fusion vehicles will have their clutch assembly replaced free of charge. The recall began August 3, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S07.
Structure: body
Ford Motor Company (Ford) is recalling certain 2016 Focus and C-Max vehicles. The floor pan may have improperly welded left-hand apron joints.
Risk and remedy
Risk: Improperly welded apron joints may reduce the front-end structural integrity of the vehicle, increasing the risk of injury in the event of a crash.
Remedy: Ford will notify owners, and dealers will inspect the apron joints, repairing the vehicle, as necessary, free of charge. The recall began March 8, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S03.
Latches/locks/linkages: hatchback/liftgate, lock
Ford Motor Company (Ford) is recalling certain model year 2013-2017 Ford Focus hatchback vehicles manufactured February 14, 2012, to August 26, 2016 and equipped with a manual transmission. The hatchback of the affected vehicles may be unlatched with a single press of the interior latch release button. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
Risk and remedy
Risk: With only a single press needed, the driver may accidently unlatch the hatchback, increasing the risk of injury to any unsecured passengers in the back.
Remedy: Ford will notify owners, and dealers will reprogram the Body Control Module with updated software, free of charge. The recall began February 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C13.
Show 11 Canadian recalls
Fuel system
2026-07-14 · campaign 2026-338
Issue:
On certain vehicles the recall repairs completed by a Ford dealer during recall 18S32 (Transport Canada recall no. 2018-577) may not have been done correctly. As a result, a another repair is required.
On certain vehicles, the canister purge valve (CPV) may stick open and cause the fuel tank to deform. If this happens, the fuel gauge could read incorrectly and there could be a loss of power to the wheels.
Note: This recall is an expansion of Transport Canada recall no. 2018-577. Vehicles repaired under that recall also require this repair.
Safety Risk:
A sudden loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software and, if necessary, replace the CPV. If the CPV is replaced, the dealer will inspect and replace the carbon canister, fuel tank and fuel delivery module, as necessary. In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
Powertrain
2026-06-09 · campaign 2026-281 · 446 vehicles
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 18S07 (Transport Canada recall no. 2018-129) may not have been done correctly. As a result, a second repair is required.
Note: This recall only affects vehicles equipped with a 1.0 L or 1.6 L engine and a manual transmission.
On certain vehicles, repeated clutch slipping could cause the pressure plate to fracture. If this happens, transmission fluid could leak onto hot components in the engine compartment.
Safety Risk:
Oil that leaks onto hot components can create the risk of a fire. Additionally, an oil leak could create a hazard for others and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the system software to detect and prevent prolonged clutch slip. For certain vehicles, the dealer will also inspect and, if necessary, replace the clutch assembly.
Electrical
2026-01-09 · campaign 2026-004
Issue:
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
Note: This recall only affects certain vehicles equipped with a 2.0 L engine.
Safety Risk:
A short circuit can create the risk of a fire.
Corrective Actions:
To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.
Electrical
2026-01-09 · campaign 2026-005
Issue:
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair.
Safety Risk:
A short circuit can create the risk of a fire.
Corrective Actions:
To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.
Engine
2023-12-22 · campaign 2023-704
Issue:
On certain vehicles, the engine oil pump tensioner and/or the engine oil pump drive belt could fail and cause a loss of engine oil pressure. If this happens, the engine could fail and cause a loss of power to the wheels and a loss of power braking assist.
Note: This recall only affects vehicles equipped with a 1.0L engine.
Safety Risk:
A sudden loss of power to the wheels could increase the risk of a crash. A loss of power brakes can cause an increase in brake pedal force and lead to an increase in stopping distance.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the oil pump drive belt tensioner assembly. The dealer will also replace the oil pump drive belt.
Powertrain
2018-12-03 · campaign 2018-665 · 134 vehicles
On certain vehicles equipped with a 1.0 L GTDI engine and 6-speed manual transmission, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak. A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. Note: This is an expansion of recall 2018-129.
Fuel system
2018-10-23 · campaign 2018-577
On certain vehicles, the Canister Purge Valve (CPV) may stick open and cause excessive vacuum in the fuel system that could deform the fuel tank. If this were to occur, it could cause: a malfunction indicator light (MIL) to illuminate, erratic readings on the fuel gauge, and/or the engine may stall. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the Powertrain Control Module (PCM) with new software and replace the CPV as necessary. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. Note: In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
Powertrain
2018-03-14 · campaign 2018-129 · 513 vehicles
On certain vehicles equipped with 1.0L GTDI or 1.6L GTDI engines and manual transmissions, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak. A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. For the Fusion model, dealers will replace the clutch assembly.
Structure
2017-01-25 · campaign 2017-039 · 1 vehicles
On certain vehicles the floor pan may have been built with improperly welded left hand body apron joints. As a result the vehicle would have reduced front-end structural integrity, which could increase the risk of injury to occupants in the event of a frontal crash. Correction: Dealers will inspect the joints of the body apron, and will repair as required.
Structure
2016-09-27 · campaign 2016-475
Certain vehicles equipped with manual transmissions fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 206 – Door Lock and Door Retention Components. The rear hatchback can be unlocked and unlatched with a single press of the interior latch release control button while the vehicle is in motion (less than 7 km/h), which is contrary to the requirements of the standard. As a result, unrestrained occupants may be at greater risk of injury. Correction: Dealers will reprogram the Body Control Module with updated software.
Powertrain
2016-06-28 · campaign 2016-328 · 66 vehicles
On certain Focus Electric vehicles, there may be increased friction and excessive wear of the differential pinion gear shaft due to an error in manufacturing. This could result in localized overheating and eventual fracture of the pinion shaft or pinion gears, which would result in a loss of motive power while driving and loss of the transmission park function without warning, which could allow the vehicle to roll away while in PARK, increasing the risk of injury and/or property damage. Correction: Dealers will install a new transmission differential assembly.
Owners filed 1,184 complaints with NHTSA about the 2016 Ford Focus (27 crashes, 2 fires, 24 injuries reported). Among 20 model years of this model, it ranks #6 for the most complaints (median 900).
NHTSA 5-Star Safety Ratings for the 2016 Ford Focus.
EPA ratings for each 2016 Ford Focus version.